Print Page | Close Window

avistart 4300 reqs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98792
Printed Date: May 16, 2025 at 9:33 AM


Topic: avistart 4300 reqs

Posted By: tommyk203
Subject: avistart 4300 reqs
Date Posted: November 08, 2007 at 8:24 PM

I've been looking around to put a remotestart in my car and decided i want to install an avistart 4300 in a 2005 ford explorer.  i would ultimatley like to be able to remote start (obviously), lock/unlock doors, open rear hatch window(factory system already has this option), bypas the pats system, and maybe roll up the winows when i arm if i get really ambitious.  I've looked at alot of the avistart install manuals, and their refrences to bypassing pats is quite old.  I would greatly appreciate it if someone could let me know what additional parts i would need and point me to any resources.

Thanks for all your help




Replies:

Posted By: profuse007
Date Posted: November 08, 2007 at 8:34 PM
You will need a special unit to bypass the PATS, like PKU-F2. And you do NOT need to give up a key. check ebay, they're pretty cheap and programming is dummy-proof.

Thats all you need to get your KE/RS/security installed. Other accessories like you described will required some relays and maybe diodes.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).


Print Page | Close Window