Print Page | Close Window

06 a4, can, 5900

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98847
Printed Date: May 16, 2025 at 6:44 PM


Topic: 06 a4, can, 5900

Posted By: Strizzy23
Subject: 06 a4, can, 5900
Date Posted: November 10, 2007 at 4:11 PM

I'm tring to put a 5900 in and i got the can 1 everytime i power up the can it blinks green then when i turn the ignition on it goes red for 5 second on the sheet it said thats a internal error any i deal how to fix this??? thanks for the help




Replies:

Posted By: Velocity Motors
Date Posted: November 11, 2007 at 9:59 AM
Get a different CAN module or if it's updateable , flash a new version on the module.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: Strizzy23
Date Posted: November 11, 2007 at 11:54 AM
so you saying it a bad can not the install??? i dont belive you can upgrade it but i will find out thanks for the help




Posted By: Strizzy23
Date Posted: November 12, 2007 at 12:09 PM
how would you update the firmware on it




Posted By: Velocity Motors
Date Posted: November 16, 2007 at 7:49 AM
If there's a update link from the manufacturer then use it. I use Fortin and most of their modules are now flash link updatedable via internet through their flashlink module.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: BNLUIS
Date Posted: November 16, 2007 at 11:59 AM
If I am not mistaken the Can 1 can be updated, but it has to be send back to the Manufacturer. (DEI)

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.




Posted By: Strizzy23
Date Posted: November 16, 2007 at 6:12 PM

thanks for all the replys i sent it back to dei and they sent me a new one so no issue i thought i hook some up wrong never did a audi but i got it all done and working






Print Page | Close Window