clifford alarm supernova ll

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98852
Printed Date: May 15, 2025 at 10:07 PM

Topic: clifford alarm supernova ll

Posted By: mirage500f
Subject: clifford alarm supernova ll
Date Posted: November 10, 2007 at 5:58 PM

I bought a car with this alarm in it and don't have the valet code.

My question is how do I reset the code??

Thanks in Advance.

Replies:

Posted By: howie ll
Date Posted: November 10, 2007 at 6:18 PM

I believe this golden oldie had a flick switch, you turned on ign and flicked the switch to put it into valet/programming mode, otherwise factory code was "2"

Posted By: mirage500f
Date Posted: November 11, 2007 at 1:13 PM

Yes it appears that the factory code has been changed, my question would be that can I by-pass this and input new code?

Thanks for replying.

Posted By: mirage500f
Date Posted: November 11, 2007 at 1:37 PM

Yes it appears that the factory code has been changed, my question would be that can I by-pass this and input new code?

Thanks for replying.

Posted By: howie ll
Date Posted: November 11, 2007 at 2:51 PM

No it was fixed, none of your software fixes in those days, send it to DEI and see what they will do.

Posted By: mirage500f
Date Posted: November 12, 2007 at 1:13 PM

Thanks I'll check with them.

Print Page | Close Window