dei 689m instruct were not really clear

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98942
Printed Date: May 14, 2025 at 10:41 PM

Topic: dei 689m instruct were not really clear

Posted By: precisionm
Subject: dei 689m instruct were not really clear
Date Posted: November 13, 2007 at 12:15 AM

I searched the fourm but could not come up with the answers. This is my first time using this unit. And the customer has a 5 speed. I figured out all the other wires except theses. light blue (-) input-shut down before remote start. Also dark blue (-) input gnd in from car starter.-I know this is tied in with 85 on the relay. Please help a fellow installer out. Customer is coming in on thursday. ANd I trying to get the alarm prepped. Thanks all

Replies:

Posted By: reisset
Date Posted: November 13, 2007 at 3:28 PM

Light blue is use to add a motion sensor for a convertible vehicle. I don't think that you need it.

The blue wire is connect to the gnd out while remote start is running.

reisset

Posted By: precisionm
Date Posted: November 15, 2007 at 2:00 PM

Thanks man, I realy appreciate it. Setup a paypal. I'll take care of you when the car is done.

Print Page | Close Window