2007 f 150 dei programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99012
Printed Date: April 27, 2024 at 9:24 AM
Topic: 2007 f 150 dei programming
Posted By: bondo-boy
Subject: 2007 f 150 dei programming
Date Posted: November 14, 2007 at 8:23 PM
truck starts and runs for about 10-15 seconds shuts off tried to learn tach but led flashes real fast ,trying to program voltage sense but dont seem to work any of programming, can anyone help me im going nutz ,
Replies:
Posted By: f150fan
Date Posted: November 14, 2007 at 8:45 PM
Where did you get the tach signal? Also what bypass was used?
Posted By: bondo-boy
Date Posted: November 14, 2007 at 9:14 PM
off of the engine,and using 556 u its starts and runs perfect for 10-15 seconds just cant figure it out led is weird and also how do you set parkling lights on constant with programming,says default one chirp parking lights flash chirp two constant,how do you get into second chirp thing?
Posted By: f150fan
Date Posted: November 14, 2007 at 9:17 PM
Make sure that you got tach at the fuel injector and not at the coil. For some reason DEI's dont like the coils in the fords. Also in the back of the install manual is shutdown diagnostics that will tell you why the rs shut down.
Posted By: bondo-boy
Date Posted: November 14, 2007 at 9:38 PM
ok ,ill try thatbut thats weird with dei,but im up for anything could that be the reason why the led isnt staying solid while programming??
|