re use plxr on a 99 malibu
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99087
Printed Date: May 17, 2024 at 8:19 PM
Topic: re use plxr on a 99 malibu
Posted By: jrilla
Subject: re use plxr on a 99 malibu
Date Posted: November 16, 2007 at 11:24 PM
Can I reuse a PLXR on a different vehicle? I have a 99 malibu and thought i would reuse a PLXR I pulled from my Caddilac. Will it work? Also, what is the deal with the Malibu passlock? Why doesn't the PLDATA work? I installed a starter on a Malibu back in 2002 and i don't remember how I bypassed the Passlock 2. All I remember is that I told the owner to do something like put the key in and turn the key to start (when the engine was running after remote starting, but with and anti-grind nstalled) before pressing the brake to prevent the the security light from coming on.
Any experiences with the Malibu that you could share would be helpful.
Thanks
Replies:
Posted By: xtremej
Date Posted: November 17, 2007 at 10:30 AM
Easy car. And yes the plxr will work fine.
Posted By: jrilla
Date Posted: November 17, 2007 at 11:34 AM
Do you need to tap into the keysense wire? It say to ONLY hook up the keysense wire if the wire goes to ground when the key is in and the door is shut. The wire does go to ground when the key is in but it does so whether the door is open or closed.
Thanks
Posted By: xtremej
Date Posted: November 17, 2007 at 2:28 PM
No keysense needed on this model.
|