avital 4000 series programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99101
Printed Date: July 12, 2025 at 7:45 PM

Topic: avital 4000 series programming

Posted By: crystalship1
Subject: avital 4000 series programming
Date Posted: November 17, 2007 at 3:28 PM

Hello Everyone,

First time poster here. I've got a Avital 4000 series (I think, as I never got a manual) remote starter. Everything is working as expected except now that my car has a few miles on it, the default engine crank duration is too short. It cranks for aprox. 1/2 of a second and I need someting more like a full second or so.

Is this programmable through the remote or do I need to take it back to the dealer?

Thanks in advance!!!

Roger :)

Replies:

Posted By: tedmond
Date Posted: November 17, 2007 at 3:39 PM

if u know where it was installed, bring it back. Avital is DEI made and they carry lifetime warrenty and labour costs, so jsut bring it back ask they guy to program it for a second test it and then leave.

Posted By: bondo-boy
Date Posted: November 17, 2007 at 5:55 PM

on avital you can change duration on remote programming..you sure its the crank time ?does it even remote start?

Posted By: Twelvoltz
Date Posted: November 18, 2007 at 4:13 PM

Grab the manual for the 561R in the downloads section here. It's the same as the 4000/4100 programming is covered starting on page 28. Crank time is feature 5.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: crystalship1
Date Posted: November 19, 2007 at 7:34 AM

That's what I needed!! Thanks Much!!!! posted_image

Twelvoltz wrote:

Grab the manual for the 561R in the downloads section here. It's the same as the 4000/4100 programming is covered starting on page 28. Crank time is feature 5.

Print Page | Close Window