late model galant immobilizer/bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99152
Printed Date: May 15, 2025 at 5:29 PM

Topic: late model galant immobilizer/bypass

Posted By: abkuniversal
Subject: late model galant immobilizer/bypass
Date Posted: November 19, 2007 at 12:14 PM

What's the chance I will need a dealership scanner in order to use the bypass with no key required? I keep reading so far, that all the units may need a scan tool to reprogram. What is this about?

Replies:

Posted By: KarTuneMan
Date Posted: November 19, 2007 at 12:45 PM

What bypass are you refering to? (part #)

Posted By: abkuniversal
Date Posted: November 19, 2007 at 1:13 PM

The omega ib-umit-3. There was another that I found that said the same thing.

Posted By: enice
Date Posted: November 19, 2007 at 1:59 PM

It depends on what year the vehicle was made. The instructions mentions which ones would most likely need a scan tool. I did use one of those for a 2006 Galant and it worked flawlessly.....

Posted By: abkuniversal
Date Posted: November 19, 2007 at 2:06 PM

I plan on doing an '05, shouldn't that be the same as the '06. Have you ever run into the situation where you would need a dealer scantool? I don't understand why.

Print Page | Close Window