05 duramax won’t remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99255
Printed Date: May 08, 2025 at 10:09 AM

Topic: 05 duramax won’t remote start

Posted By: bigtime95
Subject: 05 duramax won’t remote start
Date Posted: November 22, 2007 at 5:19 PM

New guy here-I just installed a Autopage rs900 in my 05 Duramax and was told I did not need a module for it. After doing some reading I found out otherwise. Obviously I did not hook my door locks up yet. The problem I'm having is when I remote start the engine cranks, starts momentarily and then shuts off, and the factory security light flashes. I assume this is a passlock problem, and was wondering if there was any way to fix the problem or if the module will fix it for me?

Thanks

Replies:

Posted By: offroadzj
Date Posted: November 22, 2007 at 5:30 PM

the module will fix it for you. And if I am not mistaking, you will also need a module for the doorlocks as they are data controlled. IF you use dei, you can pick up an older module (457gw) for pretty cheap, or the newer 1700G/G1/1701G for a little more. Either way, they are both easy to hookup.
HTH

Kenny

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Posted By: KarTuneMan
Date Posted: November 22, 2007 at 7:23 PM

I wouldn't do this truck without the "module"

Posted By: bigtime95
Date Posted: November 22, 2007 at 9:20 PM

Thanks Guys-I did not mention that the key does not have a chip in it-not sure if this makes any difference??

Posted By: Velocity Motors
Date Posted: November 22, 2007 at 10:42 PM

The code is set into the ignition , not the head of the key. Module required for the Passlock as well as door lock integration.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA