clifford avantguard 5.1 06 dodge charger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99308
Printed Date: May 12, 2025 at 10:42 AM

Topic: clifford avantguard 5.1 06 dodge charger

Posted By: lrballa00
Subject: clifford avantguard 5.1 06 dodge charger
Date Posted: November 24, 2007 at 3:28 PM

Hello,

I have the mentioned alarm installed and Zone 8 keeps triggering shortly after arming... The manual lists it as Mux 2 Input Trigger - for optional sensors. I don't have any other sensors installed besides the included ones. My question is... Does anyone happen to know what could be causing this? I called my installers and they said that it was the proximity sensor, but that is Zone 1, which is set to the lowest sensitivity. I know my neighbors are probably wized off at me, because it goes off at random times. I'm hoping for a remedy. I'd appreciate any help or advice. My installers won't be available until Thursday.

Thanks again,

Curtis

Replies:

Posted By: lrballa00
Date Posted: November 24, 2007 at 3:56 PM

I forgot to mention that the bypass module that I'm using is the XK-532.

Posted By: lrballa00
Date Posted: November 24, 2007 at 5:21 PM

Mods,

Please delete this thread... After further research, I'm inclined to believe that it's the 507M Digital Tilt-Motion sensor that's setting off the alarm.. I'll try cutting the black loop, setting it to normal sensitivity, to see if that helps.

Thanks again,

Curtis