command start not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99364
Printed Date: July 12, 2025 at 7:45 PM

Topic: command start not working

Posted By: bunkass
Subject: command start not working
Date Posted: November 26, 2007 at 10:11 AM

Hello all,

I have a Commany start installed on my 5 spd/99 prelude and it suddently stopped working.
The remote can still be used to open doors, but when I goto active the starter(hold down 1 and leave car running) right before I get out of the car, it does not activate. I've tried unplugging the head unit and letting it restart, but no luck. I noticed when i press the hoodpin the parking lights don't blink like they normally do.

Any thoughts???

Thanks for the help

Replies:

Posted By: peterubers
Date Posted: November 26, 2007 at 10:15 AM

does the hoodpin look corroded? It won't start if the hood pin is grounded...

-------------
The search function is your friend.

Posted By: peterubers
Date Posted: November 26, 2007 at 10:15 AM

you can try disconnecting the hood pin wire, then remote starting it and see if that works

-------------
The search function is your friend.

Posted By: muaiad97
Date Posted: November 29, 2007 at 9:09 PM

check the wire for the handbrake or one of the fuse for the power blowen chek it

Print Page | Close Window