Print Page | Close Window

matrix 50.5x problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99571
Printed Date: May 13, 2025 at 6:18 PM


Topic: matrix 50.5x problem

Posted By: sicbomb
Subject: matrix 50.5x problem
Date Posted: December 02, 2007 at 12:24 AM

I was in the middle of installing the Clifford Matrix 50.5X on a 2008 Mitsubishi Lancer Evolution and as soon as I connected the siren output wire (brown) a low leveled siren sound started coming out of the siren.  I connected all of the wires except the ones on the satellite, since I don't plan on using the remote start feature.

How do I get rid of this low level siren sound?  It's just continues even when I arm or disarm the system.  Is there something on the satellite that I need to connect?  If so, is there a way to make that connection without using the satellite unit (like connecting the ribbon cable wires directly)?

Thanks in advanced

-SiC=



-------------
Ex-Installer from KMA Racing Hawaii
Currently working in Japan



Replies:

Posted By: sicbomb
Date Posted: December 02, 2007 at 4:49 AM
NM all, I figured it out myself. 

-------------
Ex-Installer from KMA Racing Hawaii
Currently working in Japan


Print Page | Close Window