04 a4 bypass module
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99603
Printed Date: April 25, 2024 at 3:18 PM
Topic: 04 a4 bypass module
Posted By: timaay
Subject: 04 a4 bypass module
Date Posted: December 02, 2007 at 9:03 PM
Replies:
Posted By: Velocity Motors
Date Posted: December 02, 2007 at 10:09 PM
Posted By: tedmond
Date Posted: December 03, 2007 at 9:29 AM
Posted By: timaay
Date Posted: December 11, 2007 at 5:18 PM
Posted By: timaay
Date Posted: December 11, 2007 at 5:26 PM
Posted By: thepencil
Date Posted: December 11, 2007 at 8:47 PM
"What is the CAN1 module used for, can it be used in place of a key in box bypass kit? Is it worth the money?"
If time is an issue yes it's worth the money. If making direction connection to the vehicle is not your strength, by all means use it.
The CAN1 is just an interface module that does all the feature of locks, trunks... etc , basically you make all your connection from your remote starter unit to the can1 module, and from the can1 module you make a two wire connection to the vehicle data wires. It's a time saver when it all works!
CAN 1 only does the convenience feature, and yes you still new the spare key in the box for the bypass.
"VW / AUDI ORIGINAL EQUIPEMENT CAN BUS CONTROL INTERFACE MODULE Controls door locks, trunk release, interior lights, windows up/down, sunroof, headlights, parking lights, turn signals, hazard lights, fuel door, radio, horn in select VW and Audi vehicles. Communicates via data with Directed ESP2 equipped systems."
-------------
Be careful whose advice you buy, but be patient with those who supply it.
If time is an issue yes it's worth the money. If making direction connection to the vehicle is not your strength, by all means use it.
The CAN1 is just an interface module that does all the feature of locks, trunks... etc , basically you make all your connection from your remote starter unit to the can1 module, and from the can1 module you make a two wire connection to the vehicle data wires. It's a time saver when it all works!
CAN 1 only does the convenience feature, and yes you still new the spare key in the box for the bypass.
"VW / AUDI ORIGINAL EQUIPEMENT CAN BUS CONTROL INTERFACE MODULE Controls door locks, trunk release, interior lights, windows up/down, sunroof, headlights, parking lights, turn signals, hazard lights, fuel door, radio, horn in select VW and Audi vehicles. Communicates via data with Directed ESP2 equipped systems."
-------------
Be careful whose advice you buy, but be patient with those who supply it.