auto wipers and clifford 50.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99616
Printed Date: May 15, 2025 at 2:16 AM

Topic: auto wipers and clifford 50.5

Posted By: rt4x4
Subject: auto wipers and clifford 50.5
Date Posted: December 03, 2007 at 8:17 AM

just installed a clifford 50.5 with a XK01 module on a 2994 silverado,but randomly it seems to trigger the aftermarket auto wipers, any idea why this might be happening

Replies:

Posted By: rt4x4
Date Posted: December 03, 2007 at 8:40 AM

need to add more information, this only happens after remote start,you put your key in the ignition,turn to on and when you touch the brake it triggers the auto wipers, ant ideas?

Posted By: KarTuneMan
Date Posted: December 03, 2007 at 9:40 AM

You can find a yellow (POS)+ wiper wire in the ign. harness "box"

You can "break" this wire with a relay triggered by ground while running.

Cut the wire 1/2 to pin 30, the other 1/2 to 87a. 12v to 85, and your ground while running to 86.

This will open the wiper wire while the remote start is on.

-------------

Posted By: rt4x4
Date Posted: December 04, 2007 at 8:45 AM

is there a way to set the clifford back to all of its default settings?

Posted By: rt4x4
Date Posted: December 05, 2007 at 3:25 PM

or does it have to be done with a bit writer

Posted By: rt4x4
Date Posted: December 05, 2007 at 3:38 PM

sorry for all the questions but i just wnat to understand why when remote started when i touch the brake it triggers the auto wipers, just trying to understand why this would happen

Posted By: rt4x4
Date Posted: December 09, 2007 at 11:40 PM

does anyone understand why the hitting the brake when remote started would trigger the raingaurd auto wipers

Print Page | Close Window