Print Page | Close Window

shortcut with 451m

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99645
Printed Date: May 21, 2024 at 1:31 AM

Topic: shortcut with 451m

Posted By: sicbomb
Subject: shortcut with 451m
Date Posted: December 04, 2007 at 6:18 AM

I'm almost done with installing a Clifford Matrix 50.5X on a 2008 Mitsubishi Lancer Evolution. The vehicle is equip with a Smart key system controlled by ETACS CAN Bus system. I can't seem to find any wires for door lock relays or switches so I plan on doing a short cut and connect directly to the driver's side door lock actuator. The door lock actuators are a standard 2 wire type and if the driver's side locks or unlocks all the other doors will follow.

Now my question is can I just hook up the Dei 451M to connect to the acuator directly? Are there any additional items that I'll need for this operation?

Thanks

SiC

-------------
Ex-Installer from KMA Racing Hawaii
Currently working in Japan

Replies:

Posted By: Twelvoltz
Date Posted: December 04, 2007 at 6:21 AM

You can use the 451M for that application. Just hook it up using the 5-wire diagram.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: sicbomb
Date Posted: December 04, 2007 at 6:53 PM

Thanx, I'll give it a try

-------------
Ex-Installer from KMA Racing Hawaii
Currently working in Japan

Print Page | Close Window