556hw on 1999 honda accord
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99662
Printed Date: May 14, 2024 at 2:46 AM
Topic: 556hw on 1999 honda accord
Posted By: gixxerboyz
Subject: 556hw on 1999 honda accord
Date Posted: December 04, 2007 at 8:06 PM
so i am putting an autopage remote start with DEI 556hw bypass module on a 99 accord and I am having trouble with the module. after I program the module it says to turn off key then turn it back on to confirm its programmed, once i do that the l.e.d. light does not come back on confirming this. can someone please provide me with what color wires need to be hooked up to just so I can make sure I have it wired right. if i leave the key in the ignition it starts. any help will be greatly appreciated
Replies:
Posted By: Twelvoltz
Date Posted: December 04, 2007 at 8:14 PM
Are you using the black key to program the bypass?
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: gixxerboyz
Date Posted: December 04, 2007 at 8:20 PM
yes, it goes to the part where it blinks twice but once i turn key off and then back on to confirm there is nothing.
Posted By: gixxerboyz
Date Posted: December 07, 2007 at 5:55 PM
nobody has any info?? maybe someone knows the exact wires to connect to because the install directions for this module are very vague. any help will be huge
Posted By: tedmond
Date Posted: December 07, 2007 at 7:31 PM
i dont think the modual can confirm that its programmed. Just remote start it and see if it works, if it does then its programmed correctly.
Posted By: peterubers
Date Posted: December 07, 2007 at 7:41 PM
did you try remote starting the vehicle, despite the lack of LED confirmation of programming?
-------------
The search function is your friend.
Posted By: gixxerboyz
Date Posted: December 07, 2007 at 7:52 PM
tedmond wrote:
i dont think the modual can confirm that its programmed. Just remote start it and see if it works, if it does then its programmed correctly.
i could post word for word what the install manal says but it does say that it will confirm that it is programmed. i am absolutely baffled, cuz like i said the directions for what wires are to be connected on the car side is basically worthless.
Posted By: gixxerboyz
Date Posted: December 07, 2007 at 7:53 PM
peterubers wrote:
did you try remote starting the vehicle, despite the lack of LED confirmation of programming?
yes i did. it just cranks. but if i have the key in the ignition it will start
Posted By: tedmond
Date Posted: December 08, 2007 at 8:29 AM
got the manual? if soi can show u which wires u use and which is on the car.99 accords should have 5 wires in a green plug. im not sure what wires come ofwf the unit but on the car it lists as Pin 1 - Yellow/Black (Ignition)
Pin 2 - Red (Data)
Pin 3 - Blue (Data Synchro)
Pin 4 - BROWN / Black (Ground)
Pin 5 - N/C
Posted By: tedmond
Date Posted: December 08, 2007 at 8:49 AM
alright found the manual and this is how u should connect it 556HW make sure ur in mode 2 by entering program mode and with the button, press untill the unit flashes 2 times. once it flashes 2 times, its ready. RED- 12v constant
BLACK (556hw) to Pin 4 - BROWN / Black (Ground)
PINK (556hw) to Pin 1 - Yellow/Black (Ignition)
ORANGE / BLACK (556hw) to Pin 3 - Blue (Data Synchro)
CUT RED wire on 5 pin Harness (green plug)
Yellow/Black (556hw) to Pin 2 - Red (Data)towards key cylinder or plug
Yellow (556hw) to Pin 2 - Red (Data) towards Car ECM or to the front of ur car.
Blue/White - ground in from remote start or connect to wire that says GROUND OUT WHEN RUNNING
Posted By: gixxerboyz
Date Posted: December 09, 2007 at 5:04 PM
i just wanted to say thank you to everyone that posted on here for me. tedmond was extremely helpful and his info was spot on. you guys are great
Posted By: tedmond
Date Posted: December 09, 2007 at 9:51 PM
your welcome. I, always willing to help any1 as long as they are patiend and no so fiesty, thinking they know evrthng. It was a pleasure helping you. I hope you aunt appreciates the deed u did for her ! now she can get in a warm car. thats a super xmas gift i would say ahahahah CHEERS ! btw, ur not the only 1 to get lost, for sure the manual was confusing. I stared it it for a good 20 min before typing my reply =). That is why i use FORTIN and BYPASSKITS, not DEI, they super vague onthe manuals.
|