561t, 06 fusion

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99664
Printed Date: July 12, 2025 at 3:17 PM

Topic: 561t, 06 fusion

Posted By: hunter ele.
Subject: 561t, 06 fusion
Date Posted: December 04, 2007 at 8:18 PM

can i use the 561t to add to RS to the factory keyless?

Replies:

Posted By: Twelvoltz
Date Posted: December 05, 2007 at 7:38 AM

If it is a Fusion then yes you can. The Ford remotes work when the remote start is running.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: hunter ele.
Date Posted: December 07, 2007 at 5:25 PM

Hey all ,,,hey iv got a 06 fusion i put a 561t on,,, ,,and its not workin my instller said it was something to do with the positve needing to be a negitive? HELP

Posted By: tedmond
Date Posted: December 07, 2007 at 7:30 PM

? postive to be negative, polarity can be changed easitly with the use of a relay. is ur installer certified or knows what hes talkin about?

Posted By: hunter ele.
Date Posted: December 08, 2007 at 7:47 AM

ya but whats happing is the pluse isnt stong enough to trigger the remote start

Posted By: Twelvoltz
Date Posted: December 08, 2007 at 1:39 PM

I do the Ford setups using the factory remote quite often. I have NEVER had any that the pulse was not 'strong' enough in.

-------------
Installer, IT support, and FFL. I need less hobbies.

Print Page | Close Window