viper blue led wont shut off
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99780
Printed Date: May 13, 2024 at 3:56 PM
Topic: viper blue led wont shut off
Posted By: kemske216
Subject: viper blue led wont shut off
Date Posted: December 08, 2007 at 11:55 AM
viper 5900 in an 03 envoy. cant get my blue led to shut off. here's the deal, everything worked great a second ago, i tried to remote start it and it would start, then imidiately die, three times in a row. so i tried to go into into the menu's to change some voltage settings, and now the blue led is steady on, and wont shut off, no matter what i press. i cant get into any menu's. any ideas? thanks
Replies:
Posted By: KarTuneMan
Date Posted: December 08, 2007 at 12:02 PM
You should look in the manual.... It's in valet mode!
Posted By: mobile1
Date Posted: December 08, 2007 at 12:03 PM
You are in Valet mode. to shut this off or turn this on you turn the ignition on the off then push the valet switch once. What are you using for a door trigger? The reason I ask is, most times when people put \their R/S into valet mode when they try to get into programing, is because the car doesn't see the door being open.
Posted By: kemske216
Date Posted: December 08, 2007 at 12:09 PM
im using a gmsl-2 bypass module. i have the door trigger hooked up to the dome light in drivers side headliner.
Posted By: kemske216
Date Posted: December 08, 2007 at 12:14 PM
yeah its not recognizing the door trigger. it use too? im gonna check the purple obd2 wire.
Posted By: kemske216
Date Posted: December 08, 2007 at 12:59 PM
ive got the purple obd2 wire connected, i know because they control the parking lights and are flashing when i arm/disarm. im gonna have to take another look at the door trigger wire in the headliner, i had it working before.
Posted By: howmuchlonger
Date Posted: December 09, 2007 at 11:10 PM
It probably saw ground w/the door shut. I hope you don't have dome supervission hooked up to the same wire. Any one else smell something?
-------------
Test it w/your meter!!!
Posted By: kemske216
Date Posted: December 10, 2007 at 2:31 PM
i got it going. its funny though, all i was suppose to do was hook my bypass up to the viper and the viper was suppose to take care of all the door triggers. oh well. thanks for the help guys.
|