disable factory alarm input, 96 pathfinder

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99790
Printed Date: May 09, 2025 at 11:26 PM

Topic: disable factory alarm input, 96 pathfinder

Posted By: yoskeeze
Subject: disable factory alarm input, 96 pathfinder
Date Posted: December 08, 2007 at 7:56 PM

1996 nissan pathfinder.i have a prestige(audiovox) remote start.all works well except i am unable to bypass factory alarm to remote start.says yellow/black wire(from rem start) to lt.green wire at antitheft module.doesnt work.i have to unlock with remote then use remote start or else alarm will go off.yellow/blk wire is not hooked up now

Replies:

Posted By: Chris Luongo
Date Posted: December 08, 2007 at 8:06 PM

yellow/black is to be connected to the ignition input of another, aftermarket alarm, as indicated in the owner's manual.

The small BLACK/ blue makes a pulse before remote starting, and is used to disarm the factory alarm.

Print Page | Close Window