clutch by pass for compustar

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99801
Printed Date: May 13, 2025 at 3:23 PM

Topic: clutch by pass for compustar

Posted By: llong92
Subject: clutch by pass for compustar
Date Posted: December 09, 2007 at 3:22 AM

please show me how to by pass clutch on my 1991 honda prelude for compustar install .

thanks !

Replies:

Posted By: tedmond
Date Posted: December 09, 2007 at 7:08 AM

im sure honda clutches are negative trigger. on you clutch, if u have cruise control, there will be 2 connectors. Take the top one, and test it with a volt meter. One wire should show constant ground, and other shows ground when the clutch is pressed all the way down. If it is a negative clutch wire up a relay like so.

85 - Constant 12v
86 - Ground out when running from RS
70 - High Current ground
30 - to clutch wire that shows (-) when pressed.

now the car will always remote start.

Posted By: extreme1
Date Posted: December 09, 2007 at 8:25 AM

compustar has a negative start wire, just hook it up the negative clutch wire.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Print Page | Close Window