2006 bmw 525i remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99830
Printed Date: May 16, 2024 at 4:15 AM
Topic: 2006 bmw 525i remote start
Posted By: asag20
Subject: 2006 bmw 525i remote start
Date Posted: December 09, 2007 at 9:41 PM
hello fellows, i have a customer who want a remote starter in his 2006 525i, with this car you have to step on the break and use a normal key at the same time to start the car,, i have an inteface for the pdl and oem alarm but this car ignition wiring is in a ribbon form, how do i go about it with this ribbon issue?, has anyone done one of this 2006 525i?,
and how do i intergrate the step on break and start with key at the same time?, thanks all, thanks to velocity motors in advance for your valued tech advice.
Replies:
Posted By: howie ll
Date Posted: December 10, 2007 at 12:22 PM
Where does the ribbon wire go to? Somewhere down the line you are going to find that ribbon becoming the normal purple, light green and light green /black (or BLACK/ green). Suggest fuse/conrol box. Status output from R/S to a relay pull the brake leads to 87 and 30
Posted By: chadwa2003
Date Posted: December 10, 2007 at 8:44 PM
Use an int-bmw-1 from fortin with a can-sl2 that will do everything you need
|