2007 volkswagon rabbit, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99862
Printed Date: April 28, 2024 at 10:14 PM

Topic: 2007 volkswagon rabbit, remote start

Posted By: stzcole
Subject: 2007 volkswagon rabbit, remote start
Date Posted: December 10, 2007 at 9:33 PM

Hello everybody!

I am about to do a remote start on a 2007 Rabbit and I was wondering if anyone has done one before. I have read the wiring diagram and it seems similar to a Jetta but if anybody here has done one I would love to here any suggestions or comments about it.

If everything goes alright I will post the wiring info, but I would like to make sure it is accurate first.

Thanks for the comments!

Replies:

Posted By: howie ll
Date Posted: December 11, 2007 at 3:34 AM

Suggest a CAN 1 interface and a 556uw transponder by-pass.

Posted By: OhioMike1101
Date Posted: December 11, 2007 at 8:48 AM

i hare the new VW. Good luck with that IGN harness,

-------------
South Side Audio
2501 S. High St
Columbus, OH 43207

Posted By: 13 volts
Date Posted: December 11, 2007 at 12:49 PM

Be very careful on that ign. area. Disconnect the battery also! You have to make some room to go to the ribbon cable. So that means moving the airbag sensor. Don't forget if you do a vw to have the alarm unlock and lock with remote start.

Print Page | Close Window