01 grand caravan black key
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99990
Printed Date: May 05, 2024 at 12:26 PM
Topic: 01 grand caravan black key
Posted By: ervie
Subject: 01 grand caravan black key
Date Posted: December 13, 2007 at 5:21 PM
This means i dont need a bypass right? If so would it be easier to use the xk 531 to do the door locks? and whats up with this 2nd starter (i bet i didt charge enough for this one lol)
Replies:
Posted By: tedmond
Date Posted: December 13, 2007 at 6:01 PM
the car does use a bypass, but the xk 531 will do everything for you. it will do transponder, locks, factory alarm, door pin, trunk release, and ur second starter wire. its basically an all in one unit.
Posted By: chadwa2003
Date Posted: December 13, 2007 at 6:20 PM
The car does not have a bypass. Are you just installing a remote starter if so you just need a resistor and a relay to do the second starter.
Posted By: ervie
Date Posted: December 13, 2007 at 7:24 PM
tedmond wrote:
the car does use a bypass, but the xk 531 will do everything for you. it will do transponder, locks, factory alarm, door pin, trunk release, and ur second starter wire. its basically an all in one unit.
it will do the 2nd starter without using the relay and resistor, please explain this if you can
Posted By: tedmond
Date Posted: December 13, 2007 at 8:07 PM
well yes it is true u can do it with a relay and starter. to prevent hassle of using a crap load of resistors u might want to use the xk 531. if ur willing to take ur time to buy resistors etc, then by all means, go ahead. To do a second start, the car requires a second start through 180ohms (-). if u want to wire with a relay, wirelike so 85 - ground out when running from remote start.
86 - Starter wire from remote start, ur unit might have a 200ma output for start to drive an extra relay.
87 - high current ground from chassis
30 - to 180ohm resistor and connect that to the second start wire PURPLE / BROWN (-)
Posted By: ervie
Date Posted: December 13, 2007 at 10:12 PM
tedmond wrote:
well yes it is true u can do it with a relay and starter. to prevent hassle of using a crap load of resistors u might want to use the xk 531. if ur willing to take ur time to buy resistors etc, then by all means, go ahead. To do a second start, the car requires a second start through 180ohms (-). if u want to wire with a relay, wirelike so 85 - ground out when running from remote start.
86 - Starter wire from remote start, ur unit might have a 200ma output for start to drive an extra relay.
87 - high current ground from chassis
30 - to 180ohm resistor and connect that to the second start wire PURPLE / BROWN (-)
Sorry if im confusing you but i have the xk537 how do you do it through this? or is this what your explaining to me
|