adding mark lt gaugues to f 150
Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115214
Printed Date: May 17, 2024 at 3:15 AM
Topic: adding mark lt gaugues to f 150
Posted By: dvaldez0989
Subject: adding mark lt gaugues to f 150
Date Posted: July 21, 2009 at 11:28 AM
i have a set of mark lt gauges i want to add to my 06 f-150t hey fit perfect pug in everthing works. except the a/c .it turns on but wont blow cold air any ideas??
Replies:
Posted By: i am an idiot
Date Posted: July 22, 2009 at 7:07 AM
Did you buy the new Gauge assembly off of EBay?
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
Posted By: dvaldez0989
Date Posted: July 22, 2009 at 9:14 AM
Posted By: i am an idiot
Date Posted: July 22, 2009 at 12:06 PM
There is a good chance that the piece was broken. If all plugs are the same and all other functions are working, I would have to assume that the clusters are interchangeable. Have you thought about removing the A/C control portion and swapping it with the original one. Of course that is assuming all buttons are in the same position and the only differences are the finish of the cluster.
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
|