Print Page | Close Window

push button start

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11737
Printed Date: July 15, 2025 at 4:43 PM


Topic: push button start

Posted By: shortcircut
Subject: push button start
Date Posted: April 02, 2003 at 3:32 AM

i am wanting to put in a push button start and a aircraft switch both hooked together  in to my 1990 honda civic hatch, how would i go about  wiring that up. any help would be greatly appreciated 



Replies:

Posted By: iambakerboy
Date Posted: April 02, 2003 at 11:34 PM
-Push Button Start-

Relay terminals:

30: Motor side of starter wire
87a: Switch side of motor wire
85: Ground
86 : One side of the contact on the push button itself ( the other contact will go to a 12 volt source switched )
87 : NOT USED

Hope this helps



Posted By: j.a.kelly
Date Posted: April 28, 2003 at 3:31 PM

Ive done the push button...

but i want to get rid of my key completely (my steering lock does not work) so i want a toggle switch to switch on ignition before pressing my starter button?? is this possible? could i have some help please my electronics knowledge is fairly limited!

thanx



-------------
Thanx 4 your time



Posted By: Velocity Motors
Date Posted: April 29, 2003 at 12:05 AM
Have some relays that will engage the ignition/accesory  wires when the toggle switch is grounded.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window