Print Page | Close Window

1999 Prizm w/Vampire combo Alarm Starter

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20659
Printed Date: July 14, 2025 at 2:17 PM


Topic: 1999 Prizm w/Vampire combo Alarm Starter

Posted By: jsantos615
Subject: 1999 Prizm w/Vampire combo Alarm Starter
Date Posted: October 27, 2003 at 6:36 PM

Hi All -

I successfully installed a Vampire combo alarm/starter in my girlfriend's '99 Chevy Prism.  The only hitch is that I can't get the parking lights to flash during arm/disarm/start.  Using wiring diagrams from this site, I can get either the right or the left, but not both parking lights to flash.  Wiring them in parallel will give me hazard lights everytime the turn signal is used.  I attempted to find the wire for both parking lights at the headlight switch, but can only seem to find the turn signals; I'm basically a backyard installer, so any advice would be greatly appreciated. 

Thanks!

Joe




Replies:

Posted By: ck auto
Date Posted: October 27, 2003 at 6:43 PM

 




Posted By: jsantos615
Date Posted: October 28, 2003 at 9:56 AM

thanks a million! 

BTW...I just realized that the only door pin that triggers the alarm/disarm is the driver's door pin.  Is there a wire that I can tap that will trigger when any of the four doors is opened/closed?

Cheers -

Joe




Posted By: ck auto
Date Posted: October 28, 2003 at 5:10 PM

 




Posted By: jsantos615
Date Posted: October 28, 2003 at 8:24 PM

Thanks Kirk  -

Are all 5 wires in the same harness?

Joe




Posted By: ck auto
Date Posted: October 31, 2003 at 7:05 PM

 


Print Page | Close Window