drill question

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31684
Printed Date: May 02, 2024 at 9:35 AM

Topic: drill question

Posted By: saleengt
Subject: drill question
Date Posted: May 06, 2004 at 1:50 AM

Im just wondering do any of you installers out there have an impact by makita? like the 6914 or similar impact driver? I have the 6932 and it seems to wobble a little, like if u put a bit on it you can see it its not a perfect circle, just wondering if thats normal of should i try to get a exchange, thanks.

Replies:

Posted By: Ketel22
Date Posted: May 06, 2004 at 4:10 AM

if you put a bit in any drill and speed it up you will see the imperfections in the bit. alot of the time this happens when you don't correctly seat the bit in the drill chuck.....but how does this fall under car audio.... posted_image

-------------
Quad L Handyman services

Print Page | Close Window