Welding on Cars?
Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34187
Printed Date: May 13, 2025 at 5:13 AM
Topic: Welding on Cars?
Posted By: carguy411
Subject: Welding on Cars?
Date Posted: June 19, 2004 at 1:05 PM
i want to weld a bracket in the truck for some amps and sub boxes now my only question is will i fry the elctronics in the car, should i unhook the battery,,
i dont think i can do anything to it i just wantto make sure
please let me know
thanks
Replies:
Posted By: itmdtr
Date Posted: June 19, 2004 at 2:02 PM
Disconnect the negative battery terminal, and you should be fine.
-------------
itmdtr
Posted By: carguy411
Date Posted: June 19, 2004 at 2:35 PM
ok koool
i dont have to worry about anything else right??
anything i should look for or prep before i start welding. i neve rwelded on a car usually like little racks or brackts that were srewed in but thisis the firs time in the car itsself so any suggestions would be great and should eas the sweat level alittle
lol
thanks
Posted By: cobycass
Date Posted: June 25, 2004 at 4:11 AM
why weld when you can drill small holes and use self tappers [screws] cos i find anything welded never lasts it just corrodes and rust like f... hope this helps
|