Hey guys, I'm having problems hooking up the aux channels on my SPAL shaved door kit. I've got a 4 door so I'm trying to hook up the back doors. I'm using a relay with a built in diode from 86 to 85.
I've got the aux channel from the SPAL going to 85.
86 and 87 are connected to a constant +12V with a 30 amp fuse.
and 30 is going to the solenoid.
I've tried all 5 aux channels and only one of them worked....for a day, then the fuse popped. Replaced the fuse and it still didn't work.
Is it possible that i fried all the aux channels.
Yup.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Well, I got a spare receiver because I bought 2 shaved door kits. I'm a bit hesitant on wiring up the second receiver because I don't want to fry the channels on that one . Any suggestions?
Way to hard to tell what happened. The relay is wired correct. The fuse that blew, was it for the relay or for the module? The relay should isolate the sol from the module and shouldn't have been able to blow it up. Still doesn't explain why the module's other channels didn't work.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.