Print Page | Close Window

Wiring Street Rod from scratch

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55730
Printed Date: June 02, 2024 at 6:35 AM


Topic: Wiring Street Rod from scratch

Posted By: madmarcpacifica
Subject: Wiring Street Rod from scratch
Date Posted: May 14, 2005 at 1:51 PM

Hey now!  I'm building a ground up, 1929 Ford Sport Coupe Street Rod.  My fuse panel is a "Just-A-Panel 13" Budget Series.  Ford Motorsport: starter; M-11000-A50, Alternator; M-10300-A351, Proform's HEI dist. for ford 302, Engine; '85 HO Crate motor-full roller, Carb; Holley 600cfm elec. choke, Transmission; T-5 manual, Guages; Faria electronic w/mechanical speedo.  NON COMPUTER CONTROLED, NO IGNITION MODULE.  The panel seems to be geared for GM so there are some conflicts with the alt routing, etc.  Is anyone familiar with these panels that can advise on specifics?  Thankx, Madmarc



Replies:

Posted By: Mad Scientists
Date Posted: May 15, 2005 at 7:54 PM

You likely don't want to hear this, but bite the bullet and get a complete wiring harness..  have you ever wired a car before?

Jim


Print Page | Close Window