Print Page | Close Window

custom carpeting

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5791
Printed Date: July 17, 2025 at 11:51 PM


Topic: custom carpeting

Posted By: big-e
Subject: custom carpeting
Date Posted: November 23, 2002 at 3:59 AM

how do you raise a certain  portion of the carpet so you can put a logo or design in it. I guess it would called embossing it?



Replies:

Posted By: Velocity Motors
Date Posted: November 23, 2002 at 10:13 AM
Cut the logo or words out from a harder sponge material or 1/8" masonite ( particle board ) and round off the edges or leave sharp. Glue this onto the surface that you want and carpet over it with spray glue.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window