I Need a Circuit Board Made, where to go?

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59493
Printed Date: May 10, 2025 at 10:27 AM

Topic: I Need a Circuit Board Made, where to go?

Posted By: Crispix396
Subject: I Need a Circuit Board Made, where to go?
Date Posted: July 15, 2005 at 12:44 PM

I am in need of 2 switched that take a singel 12 volt pulse and convert it into a burst pulse. (i made a topic about this earlier, but didnt get any respones and now am wondering where I can go to get one made) I just need it so that if i hold the switch down for 1 second, instead of being power fr 1 second it needs to be on-off-on-off-on-off about 10-20 times per second.

If any one knows how to build one, or can direct me to a place to get one made, I will pay for it. PLEASE and thank you.

-------------
nothing amazing yet, but its coming

Replies:

Posted By: Crispix396
Date Posted: July 15, 2005 at 5:22 PM

i was wrong someone did reply to my other post,. still what kinda place do i call to get someone to make this thing?

-------------
nothing amazing yet, but its coming

Posted By: nowlater123
Date Posted: July 21, 2005 at 9:39 PM

I don't know wher to have one made, but I can suggest that you try copper etching. It will allow you do draw out the paths for the circuits, and allow you to make your own. RadioShack should have the materials, and can help you in making your own.

-------------
Kenwood all the Way!