why would a starter make a clank noise?

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61182
Printed Date: May 13, 2024 at 2:21 PM

Topic: why would a starter make a clank noise?

Posted By: rock1
Subject: why would a starter make a clank noise?
Date Posted: August 11, 2005 at 10:49 PM

Hey why would a starter make a clank or clunk noise when turning the key? you have to keep trying to start it by turn the key more then once. the starter is new.

Replies:

Posted By: speedwayaudio1
Date Posted: August 12, 2005 at 6:22 AM

your starter may not be tight, or your flywheel may have some teeth missing.

-------------
Big Dave

Posted By: danieljaluise
Date Posted: August 12, 2005 at 8:14 AM

shhh my car does that to. it is a 91 olds cutlass with a 3.1L v6

what car and engine is it for you?

Posted By: auex
Date Posted: August 12, 2005 at 11:10 PM

speedwayaudio1 wrote:

your starter may not be tight, or your flywheel may have some teeth missing.

Yeah

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: HICKMANAE3
Date Posted: August 25, 2005 at 2:30 PM

Or it could be the tach wire because mines was making clanking noises also everytime i remote starting my car. Then i figured that i didnt have the tach wire hook up and when i hook it up everything sounded better

-------------
No security system can beat the tow truck :(

Print Page | Close Window