Bottom drawer of the tool box.
Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78587
Printed Date: April 28, 2024 at 11:06 PM
Topic: Bottom drawer of the tool box.
Posted By: firstrax
Subject: Bottom drawer of the tool box.
Date Posted: June 01, 2006 at 8:40 PM
Found these while rummaging through the bottom drawer of my tool box. Alpine sunglasses circa 1989. So, what little gems from the past are you guys hanging on to? 
Replies:
Posted By: forklift
Date Posted: June 02, 2006 at 11:33 AM
I have a Street Speak talking module, a DEI "protected by Viper" talking module, and I think I still have another one that does the "valet mode starting vehicle"
-------------
hoping I pass the 1st class for the first time on 5-18-6, wish me luck!
Posted By: Ravendarat
Date Posted: June 06, 2006 at 12:32 AM
Ive got a few banners, some crossover chips for the orion hcca line up, audiocontrol crossover chips for my 3.1 and like 8 pairs of 3 foot RCA's
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Posted By: gus1
Date Posted: June 06, 2006 at 12:10 PM
Old PG PLD-1 (the white ones), buncha loose gnarly little cables, a couple interface modules, an Electro-Therm digital thermometer, 26oz of cheapo whiskey, couple hammers, 3 foot S-K prybar, and a couple pellet guns.
Gus
-------------
Wherever I go, that is where I end up......
Posted By: djfearny2
Date Posted: June 06, 2006 at 1:47 PM
i have a whole bunch of alarms r/s systems taken out of cars that are either going back or have been upgraded, by the way i have a snap on box a big one so it has a lot of stuff that has not surfased for years. however i have made many use of relays wire harnesses and such for all the items in my box.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
Posted By: supradude
Date Posted: June 06, 2006 at 6:31 PM
I have an old Concord amp under the bed. Its the only one I've ever seen. It has to be old. Also, remember the LA Sound line of crap? I have one of the crossovers.
-------------
'85 Toy
Posted By: Ravendarat
Date Posted: June 06, 2006 at 6:41 PM
I have one of those white PLD1 laying around as well
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Posted By: spookiestylez
Date Posted: June 06, 2006 at 6:45 PM
set of refrence 4x6, basslink controller,alpone type r crossovers,bunch of relays,fuse holders,distribution block,3ft cmp rca's to bench check amps,few demo dvds,misc garbage from hooked razor blades to diodes inline in butt connectior...and a fwe extra stickers....bad thing is I just cleaned it out the other week and brought home a bunch of sheeeet. sS ------------- RTFM
|