accessory relay

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101813
Printed Date: May 25, 2024 at 9:47 AM

Topic: accessory relay

Posted By: alansund
Subject: accessory relay
Date Posted: February 02, 2008 at 6:38 PM

Here is my situation: I am installing a remote car start on a 2006 Jeep Commander and for the accessory wire from the remote start to the accessory wire in the ignition harness it states that the accessory wire needs a negative (-) through a 560 ohm resistor and an extra relay to connect. Any help on how to run the connection would be greatly appreciated.

Thank you.

Replies:

Posted By: ceasar326
Date Posted: February 02, 2008 at 7:14 PM

I hope this diagram will help you. Go to this webside

https://64.85.6.129/extrainfo/diagrams/17044_COMMANDER_CHRYSLERS%20STARTER%202%20AND%20ACCESSORY%20DIAGRAM.pdf

Posted By: alansund
Date Posted: February 02, 2008 at 7:40 PM

Thanks, that was what I was looking for!

Print Page | Close Window