1995 chevy tailight mod

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102434
Printed Date: May 06, 2025 at 3:38 AM

Topic: 1995 chevy tailight mod

Posted By: Skip5015
Subject: 1995 chevy tailight mod
Date Posted: February 22, 2008 at 8:22 AM

Guys I have one here that for some reason I can not think through. My car has 2 tailights on each side. For better visability I would like them to either alternate flash on either side with turn signals only. I would prefer to have the inner one light first then stay on till the outer one comes on then both off till it recycles again. I have not ben able to come up with anything that will leave the other functions of the turn signals in tact. Using one wire to power up each side for brakes or turns baffles Me on how to do this. I am going to attempt to attach a Chevy schematic of the turn signal switch to this so You can get an idea what I am talking about. Thanks Skip

https://s253.photobucket.com/albums/hh64/greasemonkey47/?action=view&current=scan0002.gif

Replies:

Posted By: hotwaterwizard
Date Posted: February 24, 2008 at 6:59 PM

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hotwaterwizard
Date Posted: February 24, 2008 at 7:09 PM

Remove one relay and you get this

posted_image

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: Skip5015
Date Posted: February 24, 2008 at 9:13 PM

I was looking at this in one of Your earlier posts but I didnt think I could get it to work as I thought this would also flash with brake appilication as there is only one wire that performs both the turn signal and brake light appication. Am I thinking wrong? Thanks for the input John