I am trying to come up with a control panel for my nitrous setup. The diagram is too big to include as a pic, so here is a link to the pdf:
https://www.nthtechnologies.com/temp/Nitrous_Relays.pdf
I am not sure if my wiring is correct. This is my first time at trying this stuff, so please be nice, but let me know if I need to do anything differently.
1. Should both the + signals to the latching relay be to the same terminal?
2. Will the system always have the correct state? Or are there better ways to control the power flow to make sure everything is always synchronized? I figured with constant power to the timers and the motor relays, that when I turn off the key, the bottle would close if it was open.
3. Will the timer ever fire when I just turn on/off the key?
Thanks
Darryn
Looked at the diagram dude looks ok to me. kinda sore on the eyes with the colours like that. not all that up on nitrous setup....but it looks like you got it covered there tho.
Note: Rookie members can not edit or delete their posts. Standard members may edit their posts if it is the last in the thread, and upload images. Silver and Gold members may upload file attachments to posts as well as delete their posts. Platinum members may create polls
You should reach Standard member status and recieve your edit button when you reach 50 posts.
astrosurfer wrote:
no edit buttons...??
ok
perhaps putting an rpm based relay would be an idea to completely eliminate the possibility of fire on key on/off.. this was an afterthought from above. not trying to double post or nothing. just adding my extra $0.02...lol
The Window switch in the diagram does just that.