Print Page | Close Window

dei 451m problem.

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105537
Printed Date: May 14, 2025 at 1:02 AM


Topic: dei 451m problem.

Posted By: ngruver
Subject: dei 451m problem.
Date Posted: June 17, 2008 at 8:44 PM

Hello everyone.  Im new to the site and apologize before hand if I posted in the wrong place.

I have a 91 honda crx  im installing aftermarket door locks. Im useing A hornet t740 w/ dei 451m relay.  I cant figure out  how to wire up the locks to the relay. I was told to

ground the WHITE/ black and the BROWN / white

purple at 12v

and use the leftover green and blue to the motors. This isnt working    IM getting 12v on both wires when i hit the remote but the only way i can get anything to happen is if i ground one side of the motor and the other to the green or blue.  

Sorry for the long post 

Thanks for your help  (newb)




Replies:

Posted By: Big Dog
Date Posted: June 18, 2008 at 9:54 AM
Look at diagram D on page 4 of this guide: 451M

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.



Posted By: ngruver
Date Posted: June 18, 2008 at 3:45 PM

Thanks ill try that and see what happens.


Print Page | Close Window