Print Page | Close Window

relay

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106804
Printed Date: July 06, 2025 at 1:25 PM


Topic: relay

Posted By: hddreamer
Subject: relay
Date Posted: August 15, 2008 at 6:48 AM

Hi im new to this site and had a question ,

dose anyone have a diagram for this type of wiring ;... im wiring a motorcycle , i have a momantary swithch that will be fed by 12v + i need it to switch from high beem to low beem each time it is pressed the switch is normally open , dose anyone out there have a diagram and what kind of relay to use ??? Thanks




Replies:

Posted By: KPierson
Date Posted: August 15, 2008 at 9:53 AM

https://www.the12volt.com/12voltimages/latchonoffsp.gif

Here is a diagram provided by the12volt.com - it should work!



-------------
Kevin Pierson



Posted By: i am an idiot
Date Posted: August 15, 2008 at 11:20 AM

Of course you will have to make that latching relay trigger another SPDT relay to do what you need.

Output of that relay setup to 86 of the new relay. 85 goes to ground. 30 to the battery via a fuse mounted at the battery. 87A to one of the light elements. 87 to the other element.


Print Page | Close Window