disabling shock sensor whilst car is goin

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111767
Printed Date: May 11, 2025 at 2:31 AM

Topic: disabling shock sensor whilst car is goin

Posted By: _deagle_
Subject: disabling shock sensor whilst car is goin
Date Posted: February 20, 2009 at 12:05 AM

Hi there. Just to confirm, would this setup be correct to disable shock sensor whilst turbo timer is still going?

85 - ignition signal from turbo timer
86 - ground
30 from 12V+ from shock sensor
87a to 12V+ shock sensor

Whilst turbo timer is going, it will energize the coil which means there will not be a 12V+ source to power the shock sensor, once the turbo timer is off, it will click back to 87a (12V+) and shock sensor will receive power again.

Cheers.

-------------
'00 Subaru B4 Legacy RSK

Replies:

Posted By: ckeeler
Date Posted: February 20, 2009 at 1:06 AM

yes

Posted By: Big Dog
Date Posted: February 20, 2009 at 9:24 AM

Or you can connect the ground of the shock to ignition out of your remote starter. This works most of the time but you'll have to test it in your installation.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Print Page | Close Window