wiring motor with cruise switch
Printed From: the12volt.comForum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112644
Printed Date: July 22, 2025 at 5:13 PM
Topic: wiring motor with cruise switch
Posted By: turbro
Subject: wiring motor with cruise switch
Date Posted: March 25, 2009 at 3:09 AM
So I have a 1991 toyota mr2 and currently have a simple 2 wire gear head motor that runs forward and reverse via a DPDT switch. I would like to ditch the DPDT switch and use the factory cruise control switch to control the motor. I'm sure there are more than one way to do this, I prefer the simplest and least amount of parts. Unfortunately I'm not too familiar with DPDT relays and if they operate similarly to the switches. Diagrams would help greatly
thank you in advance
btw this is to activate the gearhead motor for the exhaust cut outs
thank you in advance
btw this is to activate the gearhead motor for the exhaust cut outs
Replies:
Posted By: Big Dog
Date Posted: March 25, 2009 at 10:48 AM
Here's what I came up with.
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.