Print Page | Close Window

Relay help!!!

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11279
Printed Date: June 07, 2025 at 8:25 PM


Topic: Relay help!!!

Posted By: RaveChild
Subject: Relay help!!!
Date Posted: March 22, 2003 at 2:25 PM

can anyone tell me how to wire a relay for my remote trunk release.

it is a 1996 sunfire gt and the alarm is an autopage rs750

i know that the trunk release is the BLACK/ white wire in the keyless module and that the grey wire is the wire i need from the alarm, but i dont know how to wire the relay to make it work.




Replies:

Posted By: djfearny2
Date Posted: March 22, 2003 at 4:34 PM
yea thats easy you have to determine wether the truck release on the car is positive or negative . if it is pos than you need to take the relay and set it up like this


pin 86 and 87 give constant 10 amp fused power.
87a not used
pin 85 is the negative trigger from the alarm one of the channels on the alarm to control the relay. and pin 30 is the wire you connect to the truck wire of the car
your done

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.




Print Page | Close Window