Print Page | Close Window

linear actuator, relay, tr7, alarm

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114395
Printed Date: May 01, 2025 at 12:47 PM


Topic: linear actuator, relay, tr7, alarm

Posted By: timdareez
Subject: linear actuator, relay, tr7, alarm
Date Posted: June 11, 2009 at 3:06 PM

my objective is to use my aux 1 and aux 2 of my compustar alarm to open and close a 6" throw linear actuator...

any instructions ? diagram in doing so ????

i can wire up the linear actuators themselves to a relay
but running it off a tr7 and my alarm is another question......

please help !!! THANKS IN ADVANCE !!




Replies:

Posted By: i am an idiot
Date Posted: June 11, 2009 at 7:03 PM
posted_image
The wires labeled Alarm Lock and Alarm Unlock are where you would connect the output wires of the TR7.  Ground one of the 2 and the actuator will travel in one direction.  Ground the other wire and it travels the other way.


Print Page | Close Window