dei 528t jaguar hid relay

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115044
Printed Date: May 10, 2025 at 8:51 PM

Topic: dei 528t jaguar hid relay

Posted By: 00jag_stype
Subject: dei 528t jaguar hid relay
Date Posted: July 13, 2009 at 10:45 AM

I have a 2000 Jaguar S-type that was converted from halogen to HID factory assemblies/ballast/etc. Everything works good, but i would like to introduce a delay of a few seconds prior to the ballast igniting.
I have read posts for the DEI 528T, but can't come to grips with what is being posted in relation to my application. There is a relay for each headlight assembly that takes a negative trigger from the headlight switch and turns it into a 12volt positive. Can anyone illustrate exactly what wire for the 528T goes to what on the relays?

Thank you so very much for your help in advanced!

Replies:

Posted By: hotwaterwizard
Date Posted: July 15, 2009 at 12:13 AM

528t_pulse_timer.pdf

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hotwaterwizard
Date Posted: July 15, 2009 at 12:18 AM

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: howie ll
Date Posted: July 15, 2009 at 1:47 AM

John, on that diagramme you nicely showed, wish I could do that, surely it's cut blue loop for NEG pulse? Yours, H.

Posted By: hotwaterwizard
Date Posted: July 15, 2009 at 10:57 PM

To tell the truth I have never seen one of these timers.

Looks like I made a mistake.

I remade the Diagram from the one page instructions I have.

posted_image

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hotwaterwizard
Date Posted: July 15, 2009 at 11:06 PM

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: howie ll
Date Posted: July 16, 2009 at 1:24 AM

Honestly wasn't having a pop, you're normally so precise.

Posted By: hotwaterwizard
Date Posted: July 16, 2009 at 8:30 AM

It was a little confusing it was not the best wording

"Cut = Trigger Upon Negitive Going Away"

What Idiot would print that?

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !