Print Page | Close Window

adding sidemarker lights

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117672
Printed Date: May 16, 2025 at 12:23 AM


Topic: adding sidemarker lights

Posted By: CutDog504
Subject: adding sidemarker lights
Date Posted: November 12, 2009 at 9:25 AM

I'm trying to add sidemarker lights to some mirrors and each light has a single filament 194 bulb. I'm trying to figure out how to wire the circuit so they stay lit with the parking lights, yet still blink with the turn signals regardless of whether the parking lights are on or off.

Any ideas? posted_image



Replies:

Posted By: howie ll
Date Posted: November 12, 2009 at 9:51 AM
Feed from each via one relay for the lights and two x relays for the indicators, or via 1N5404 diodes so there's no feedback.



Posted By: CutDog504
Date Posted: November 14, 2009 at 12:25 PM
How would I wire up the relays?



Posted By: boxhead78
Date Posted: November 23, 2009 at 9:31 PM
feed your wires through the door and dashboard to steering colmn and tape into them wires

-------------
boxead78



Posted By: i am an idiot
Date Posted: November 23, 2009 at 10:01 PM

Every instance of the word Brake in the following diagram, needs to be replaced with the word Parking.
https://www.the12volt.com/installbay/forum_posts.asp~TID~114615~KW~parking+light+blinker+relay~PN~0~TPN~1#555268


Print Page | Close Window