5 wire

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119318
Printed Date: May 07, 2025 at 7:17 AM

Topic: 5 wire

Posted By: mdslax
Subject: 5 wire
Date Posted: January 14, 2010 at 8:52 AM

can someone tell me how to relay 5 wire for a trunk release motor...its for a 08 grand prix if that matters...

Replies:

Posted By: i am an idiot
Date Posted: January 14, 2010 at 11:35 AM

Audiovox does not have it listed as a 5 wire setup. Where are you getting the 5 wire info from?

Trnk Release

LIGHT BLUE

(+)

AT BCM BEHIND DRIVERS SIDE OF DASH TO LEFT OF STEERING COLUMN

Pin 45.

If you do need a 5 wire, Find the wire that powers the solenoid, cut it and connect the solenoid wire to terminal 30. Connect the other cut end to terminal 87A. Connect 87 and 86 to the battery via a 10 amp fuse. Terminal 85 connects to the output wire of your alarm system.

Posted By: mdslax
Date Posted: January 14, 2010 at 11:48 AM

direct techs says its a 5 wire...ill try to relay it as positive and see what happens...thanks for the info

Posted By: howie ll
Date Posted: January 15, 2010 at 2:40 AM

Ever thought of standard procedure, i.e. test what directwire or any one else says before posting the question?

Posted By: mdslax
Date Posted: January 18, 2010 at 12:39 PM

you know what else is standard procedure? not being a dbag. i just asked a simple question and i got my answer and even thanked the guy for it, so where you fit in this conversation is beyond me, if your trying to sound smart you just made yourself look like an idiot...go F yourself homo

Print Page | Close Window