2 step unlock feature relay
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119409
Printed Date: May 28, 2024 at 7:44 AM
Topic: 2 step unlock feature relay
Posted By: toohott7718
Subject: 2 step unlock feature relay
Date Posted: January 17, 2010 at 12:56 PM
Hello, I am new here, hello all... I installed a code alarm 610 in my 2004 chevrolet silverado. The truck didn't have power windows or power locks. So I installed power windows on it with no problems. Then I installed a code alarm 610 with auto start, and I planned to use the remote from that to work the power door lock actuators. Everything is working great but I read in my manual that I can add a relay to the two relays I already have hooked up so when I press unlock on my remote once it will unlock the drivers and two times will unlock the passenger door. I just need to know how to hook up the other relay for the 2 step unlock. Thank you for all your help. let me know if you need anymore info.
Replies:
Posted By: t&t tech
Date Posted: January 17, 2010 at 3:19 PM
Wire the third relay like this Pin 30- to the driver door motor unlock wire pin 87@- ground Pin 86 and 87- Twelve fused constant at five amps Pin 85- Take the unlock wire from the original unlock relay and connect here and the second unlock from the alarm goes to the pin on the original relay where you took the unlock wire from! ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: toohott7718
Date Posted: January 17, 2010 at 6:44 PM
ok thank you, is it possible to send me a diagram what it would all look like after I'm done. right now it is hooked up just like the actuators/reverse polarity page on this website. again thank you very much
Posted By: t&t tech
Date Posted: January 17, 2010 at 6:46 PM
 ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: t&t tech
Date Posted: January 17, 2010 at 6:48 PM
The above diagram, you will be using one side of the relay ignore the other, we'll go with the left side so you don't get confused, just as i have it labelled above in my first post!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: toohott7718
Date Posted: January 17, 2010 at 8:33 PM
I'll give it a try tomorrow, and I'll write back and let ya know. thank you
Posted By: toohott7718
Date Posted: January 20, 2010 at 2:34 AM
your awesome!! it worked and it was easy.. the only other problem I have is after I auto start my truck and I stop it with my remote the dash lights stay on until I hit the unlock button on the transmitter, then they go off. there is another wire on my alarm brain to shut the accesories off after the vehicle remote start is shut down, I just dont know what to hook it to. again thanks for all your help and also if you can help me with my other problem. thank you,
Posted By: toohott7718
Date Posted: January 20, 2010 at 10:08 PM
can anyone help me??
Posted By: toohott7718
Date Posted: January 21, 2010 at 12:19 AM
if noone knows the answer, please dleat this so I can post my question in a different forum topic. thank you
Posted By: toohott7718
Date Posted: January 21, 2010 at 12:20 AM
whoops.. I mean delete
Posted By: t&t tech
Date Posted: January 21, 2010 at 6:08 PM
You can post it in security and convenience! I'm not familiar with that specific vehicle! Sorry! Don't wait for the post to be deleted, just post in the convenience fourum!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
|