can i use a relay to make a gwr input
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125992
Printed Date: July 13, 2025 at 11:05 PM
Topic: can i use a relay to make a gwr input
Posted By: scam404
Subject: can i use a relay to make a gwr input
Date Posted: February 03, 2011 at 10:35 AM
I am installing a remote start in a 2005 Kia Sorento, and I plan on using a PKALL for the immobilizer bypass. The bypass requires a GWR input, but the remote start unit is a basic model and does not have a GWR output. Can I just use a relay with the following setup to provide a GWR to the bypass?
85 - vehicle's +12 ignition
86 - ground
30 - ground
87 - GWR input for bypass
Thanks,
Scott
Replies:
Posted By: scam404
Date Posted: February 03, 2011 at 11:51 AM
nevermind, after a little more searching it looks like only the canadian models need the bypass afterall
Posted By: howie ll
Date Posted: February 05, 2011 at 12:46 PM
For your future info the other name for GWR is "STATUS OUTPUT".
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|