Print Page | Close Window

pulsing ground to constant ground switch.

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128000
Printed Date: May 10, 2025 at 4:07 PM


Topic: pulsing ground to constant ground switch.

Posted By: madskilz78
Subject: pulsing ground to constant ground switch.
Date Posted: July 21, 2011 at 3:08 PM

I working on a proof of concept on my 1994 Toyota Camry V6 Auto and I am using the turn signal switch to activate another component.   The input of the desired switch is a pulsing ground and the desired output would be a constant ground.

Another example. When I activate the turn signal to turn left I would like to activate another 12V component. When the turn signal switch is deactivated I would like the other 12V component to be switched off.




Replies:

Posted By: madskilz78
Date Posted: July 21, 2011 at 3:11 PM
Does anyone have any idea where I may find such a switch or where I should start with making one.

Thanks



Posted By: tonanzith
Date Posted: July 21, 2011 at 9:28 PM
use a pac tr-7 module.. It is an input converter..

-------------
Gary Sather



Posted By: madskilz78
Date Posted: July 23, 2011 at 12:55 PM
I am ordering two of them now. I will let you know the results. Thanks.


Print Page | Close Window