Print Page | Close Window

push starter

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128257
Printed Date: May 08, 2025 at 2:43 AM


Topic: push starter

Posted By: aim2002
Subject: push starter
Date Posted: August 15, 2011 at 8:51 PM

I need help installing a push button starter with relay. I have 2 starter input and need how to wire it for IGNITION SWITCH HARNESS 2 relay a diagram would help

12 VOLT CONSTANT WHITE (+)

STARTER BLACK/ WHITE (+)

STARTER 2 BLACK / YELLOW (+)

IGNITION 1 BLACK/ RED (+)     

ACCESSORY /HEATER BLOWER 1 WHITE/ BLUE (+)



Replies:

Posted By: howie ll
Date Posted: August 16, 2011 at 3:11 AM
Assuming the feed from the switch to the supplied relay is POS, (TEST) use this diagram, 2nd._relay.bmp
if it's NEG, let me know.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.



Posted By: aim2002
Date Posted: August 16, 2011 at 7:32 PM
do you have a drawing of two relay. the one post is good.

thanks



Posted By: howie ll
Date Posted: August 17, 2011 at 1:08 AM
Post the original drawing especially the relay wiring please.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.



Posted By: ropuma
Date Posted: August 24, 2011 at 5:04 PM
you need two relays.
If push button starter has two wires.
one side to ground-other wire to relay #85 (to relay 1 and 2)
86-30 to blk/red (ign) with 10amp. fuse    
cut blk/white wire
87a to blk/white toward switch
87 to blk/white away from switch

second relay 86-30 blk/red (ign) 10amp. fuse
cut blk / YELLOW
87a blk / YELLOW toward switch
87 to blk / YELLOW away from switch

to start you car turn ign. on - and then push start button for 1 second.


Print Page | Close Window